Experiment Specification 01.01.01
Experiment Specification Definition
ID | 01.01.01 |
---|---|
Reference to Test Specification | 01 |
Title of Experiment | Control of voltage with an on-load tap change controller |
Research Infrastructure | UDEX |
Experiment Realisation | The combination of the OLTC and the conventional transformer is called a "smart-transformer". The test is carried out with real components in a real network with no simulation required. During the test, drops and overvoltages would be applied by instantaneously connecting and disconnecting parts of the grid components where the smart-transformer is connected, while at its output the physical quantities would be measured to check that they comply with the required setpoint previously configured. |
Experiment Setup (concrete lab equipment) | Specific lab equipment includes:
|
Experimental Design and Justification | The experiment requires the use of a real controllable network environment and so justifies the use of the UDEX infrastructure. The open possibilities of different grid voltages ranging from 0-36KV to demonstrate the objectives set out for this experiment, with a flexibility in the grid configuration providing flexibility in the load and generation characteristics requires a laboratory infrastructure such as the UDEX. |
Precision of equipment and measurement uncertainty | System uncertainty <5% |
Storage of experiment data | Experimental data is collated locally in files for posterior analysis if required. |